• 中文

    SITRAK-C5H dual-engine cleaning sweeper truck

    The cleaning sweeper truck is suitable for the mechanized cleaning and sweeping operation of urban roads, squares, airports, ports, tunnels, bridges, and road curbs.

    1. The auxiliary engine adopts international renowned brand Cummins engine, featuring strong power, low noise, better fuel-saving, and stable performance.

    2. The electronic control system adopts CAN bus control to realize intelligent one-touch operations and the voice malfunction alarm realizes the advance malfunction pre-warning and automatic malfunction display. The reversing camera system is installed.

    3. The key core components, including high and low pressure water pumps, high pressure spray nozzle, high pressure centrifugal fan, and auxiliary engine, adopt the products of international and domestic renowned brands to guarantee reliable quality and long life.

    4. The tanks are made of 304 stainless steel plates and the air ducts feature uniform flow field pressure, high adsorption force, and better rigidity and ease the thorough dumping of garbage. 5. The multiple automatic protection devices, including the water shortage warning for clean water tank, the water full warning for garbage tank, and the back gate opening, tilting, and dumping warning, are provided.

    5. The multiple automatic protection devices, including the water shortage warning for clean water tank, the water full warning for garbage tank, and the back gate opening, tilting, and dumping warning, are provided.

    6. The left and right spray booms and suction nozzles are arranged in V-shape and the sweeping brushes are freely adjustable in ground force and rotating speed and incorporate the anti-collision avoidance and automatic resetting functions.

    Technical parameter

    Vehicle model QDZ5182TXSZDG50F1
    Automotive chassis Chassis model SINOTRUK ZZ5186XXYK501GF1
    Engine model SINOTRUK MC07.27-60 国VI
    Engine rated power  202kW/2200 r.p.m
    Tire Front wheels 10.00R20
    Rear wheels 10.00R20
    Auxiliary engine Standard configuration Model and manufacturer QSB5.9-C160-30 (China-III/IV) Dongfeng Cummins Engine Co., Ltd.
    Power 117kW/2200r/min
    Clutch Automotive clutch, pneumatically driven and electrically automatic control
    Fan Type Special high-pressure centrifugal fan
    Drive mode Narrow V-belt drive
    Hydraulic system Type Electro-hydraulic control and centralized operation
    Main components Gear pump, cycloid motor, hydraulic cylinder, solenoid valve, and manifold block
    Hydraulic oil capacity 100L
    Electric system Control mode PLC control + manual control and electromechanical-hydraulic interlock
    Chassis system voltage 24V
    System voltage of working device 24V
    High pressure cleaning system High pressure water pump Type Plunger type
    Model NXP-C145/100R
    Rated pressure 10MPa
    Rated flow 143L/min
    Rated speed 1450r/min
    Low pressure flushing system Low pressure water pump Model 65QZB-50/110NST
    Flow 50m/h
    Lift 110m
    Flushing width 24m
    Operation Parameter Cleaning/sweeping operation Cleaning/sweeping width m 3.6
    Traveling speed for cleaning/sweeping Km/h 3~20
    Rated pressure of cleaning high-pressure water Mpa 10
    Rated flow of cleaning water L/min 143
    Sweeping operation Sweeping width m 3.6
    Sweeping speed km/h 3~20
    Maximum sweeping capacity m?/h 70000
    Dumping angle ≥45
    Total capacity of clean water tank m3 10
    Total capacity of garbage tank m3 7
    Masses Maximum gross mass kg 18000
    Complete vehicle curb mass kg 12060、12600
    Structural dimensions Overall dimensions (L×W×H) mm 9100×2500×3130
    Wheelbase mm 5000
    Wheel tread Front overhang mm 1450
    Rear overhang mm 2650
    Approach angle (° ) 16
    Departure angle (° ) 11
    Minimum ground clearance mm 200
    【网站地图】【sitemap】